10/04/2011 13:19:47 Sleeping until 10/19/2011 23:58:00 ...

10/04/2011 13:19:50 Sleeping until 10/19/2011 23:58:00 ...
Enter <CTRL-C> now to wake up???
13:19:54 Deployment terminated by operator before initial profile.	
No data acquired.  All memory pointers have been reset.	
Returning to Main Menu.

________________________________________________________________
Configuration: MMP_CT_NI             Version 4_12 of Apr 23 2010

               McLane Research Laboratories, USA
                     McLane Moored Profiler
                         S/N: ML12535-02
               ___________________________________
                            Main Menu
               ___________________________________
                    Tue Oct  4 13:19:55 2011


	<1> Set Time        <5> Bench Test              
	<2> Diagnostics     <6> Deploy Profiler              
	<3> Flash Card Ops  <7> Offload Deployment Data              
	<4> Sleep           <8> Contacting McLane              
	<C> Configure

		 Selection  ? 6


Clock reads 10/04/2011 13:20:24
Change time & date (Yes/No) [N] ? n

Setting watchdog clock ... done.

Profiling history:              
   Total motor hours:                  277.47 hours              
   Total meters traveled:               17141 meters


 Verification of sensor settings		

 <A> Automated (standard settings only)		
 <M> Manual    (operator controlled)		
 <S> Skip Verification

 Selection  [A] ? a


Automated verification of sensor settings.

13:20:40 RBR/LOG communication channels opened.
13:20:40 RBR/LOG powered ON. .....  .. ..
13:20:47 RBR/LOG waiting for sign-on message . .. ..
13:20:47 RBR/LOG powered OFF.
13:20:47 RBR/LOG power-down delay .....................
13:20:52 RBR/LOG communication channels closed.

Standard CTD settings verified.

13:20:53 SAT/SUNA communication channels opened.
13:20:53 SAT/SUNA powered ON. . .......................
13:21:01 SAT/SUNA powered OFF.
13:21:01 SAT/SUNA power-down delay .....................
13:21:06 SAT/SUNA communication channels closed.
13:21:06 SAT/SUNA settings verified.

Sensor suite initialized and ready for deployment.
Press any key to continue.


ID        M| Mooring ID               = 008

Start     Z| Scheduled start          =   10/20/2011 00:00:00

Schedule  I| Profile start interval   = 000 06:00:00 [DDD HH:MM:SS]                  
           R| Reference date/time      =   10/01/2011 00:00:00
          B| Burst Interval           =     Disabled                  
           N| Profiles per burst       =     Disabled
          P| Paired profiles                Disabled                  
           F| Profiles / file set      =            2                

 Stops     S| Shallow pressure         =         44.0 [dbar]                  
           D| Deep pressure            =        124.0 [dbar]                  
           H| Shallow error            =         10.0 [dbar]                  
           E| Deep error               =         30.0 [dbar]                  
           T| Profile time limit       =     00:30:00 [HH:MM:SS]                  
           C| Stop check interval      =           15 [sec]
          Y| Biospherical PAR         =     Disabled
          L| Fluorometer              =     Disabled
          O| OBS Turbidity            =     Disabled

Endurance  | Power for single profile =         22.6 [mAh]  
            | Total profiles/(240 Ah)  =         9406  
            | Est. battery expiration  =   03/28/2018 12:00:00    

 Deploy    V| Verify and Proceed

		 Selection  ? v

Checking entries ... done. All entries are within allowed ranges.

 Checking profile schedule ... done.				  
 Calculated minimum profile duration:		  00:10:16
Profile schedule selections are consistent.				

 Checking burst schedule ... done.
Burst mode disabled.

>>>>> WARNING: Flash card file limit will be reached	 
				   before the battery expires.

Accept and store schedule selections (Yes/No) [Y] ? y

Storing deployment definition parameters ... done.

CAUTION:	 Deployment will erase all data			
			 files stored on the flash card.		  

 System status:

 RTC: 10/04/2011 13:23:39   WDC: 10/04/2011 13:23:39	 11.4 Vb	  -0 mA


Proceed with the deployment (Yes/No) [N] ? y


 >>> Initializing autonomous operation <<<			

   Do NOT remove the communication cable			  
	 until initialization is complete.			

 Setting motor to Free Wheel during launch ... done.

Initializing data pointers and status flags ... done.		   

 Initializing flash card ... 			 
	  Deleting all previous data files			 
		(process may take several minutes) ... . 

Deleting all files ....
  Initializing flash pointers ... 
  Creating DEPLOY.DAT ... 
  Creating PROFILES.DAT ... 
  Creating IRQ_XCPT.LOG ... 
  Creating LASTSENT.DAT ... 
Flash card initialization complete.
10/04/2011 13:24:00

Sensor warm-up will begin at				10/19/2011 23:58:00
Initial dive to bottom stop will begin at	10/20/2011 00:00:00.


System is ready to deploy.

Remove communication cable, apply dummy			
 plug to communications port, and attach			
 faired bottom cap to vehicle.

10/04/2011 13:24:03 Sleeping until 10/19/2011 23:58:00 ...